欢迎光临深圳市强流明光电有限公司官方网站
Performance Parameters
● Luminance Efficacy: Frosted Cover:120LM/W
● Power Consumption:36W / 50W
● Input Voltage：AC200~240V
● Color Temperature: 3000K，4000K，6500K，
● Beam Angle: 120°
● Operation Temperature: -20~40℃
● Storage Temperature :-20℃ to +60℃
● LED Type: 2835 LED
● Lifespan: ＞50,000hours
● Driver Type: Isolation Driver
● IP Code : IP20
● IK Code : IK01
● Operating Humidity : ≤85%
1. It has various advantages of strong lumen direct down panel lamp.
2. Pull the switch to adjust two different color temperatures. Two different color temperature arbitrary combination. A panel lamp has three kinds of color temperature of conventional panel lamp.
3. Use environment: Hotel, factory, office, etc.
1.SL-PBE301236-H-H
2.SL-PBE606036-H-H
3.SL-PBE626236-H-H
4.SL-PBE601250-H-H
| Model | Light effect(lm/w) | Luminous flux(Lm) | Power（W) | CCT（K) | CRI(Ra) | Life(h） | Dimming mode | IP Grade | Applicable temperature |
|---|---|---|---|---|---|---|---|---|---|
| SL-PBE301236-H-H | 120 | 4320 | 36 |
3000K / 4000K / 6500K |
>80 | 50000 | 1. No dimming 2. Silicon controlled dimming 3. 0-10V dimming 4. Dali dimming |
IP20 |
Operating temperature and range:20-40°C≤85%RH |
| SL-PBE606036-H-H | 4320 | 36 | |||||||
| SL-PBE626236-H-H | 4320 | 36 | |||||||
| SL-PBE601250-H-H | 6000 | 50 |
Embedded I. The installation environment requires that the ceiling has a standard size ceiling or keel, and only the ceiling at the corresponding position needs to be removed for installation. Then replace the corresponding panel lights. No additional installation accessories are required.
Embedded II. The installation environment requires that the circlip is embedded, and a hole is made on the ceiling. The size of the hole is smaller than the size of the panel light, and then the light is absorbed on the ceiling by the elastic force of the spring.
Ceiling mounted. Installation environment requirements, the height of the storey is high, the ceiling is keel or solid wall structure, and the lamp is suspended in the room by the suspender (as shown in the above picture))
Ceiling type. The suspended ceiling is a solid wall structure. First install the ceiling frame on the solid wall. Then lock the panel light in the ceiling frame. (As shown below)
1.Determine the location of the lamp to be installed, directly screw on the screw, and fix the aluminum adapter frame on the cement roof.
1. Commercial packaging
| Model | Carton Box(mm) | N.W.(Kg)/PCS | G.W/(Kg)/Carton | PCS/Carton |
|---|---|---|---|---|
| SL-PBE301236-H-H | L*W*H=1255*365*365 | 2.0 | 17.2 | 8 |
| SL-PBE606036-H-H | L*W*H=655*365*665 | 1.95 | 16.9 | 8 |
| SL-PBE626236-H-H | L*W*H=680*365*690 | 2.1 | 18.0 | 8 |
| SL-PBE601250-H-H | L*W*H=1255*365*665 | 4.0 | 17.5 | 4 |
