150LM/W LED Double CCT Panel Light
Performance Parameters
● Luminance Efficacy: Frosted Cover:150LM/W
● Power Consumption: 25W / 40W
● Input Voltage：AC200~240V
● Color Temperature: 3000K+4000K,4000K+6000K,3000K+6000K
● Beam Angle: 120°
● Operation Temperature: -20~40℃
● Storage Temperature : -20℃ to +60℃
● LED Type: 2835 LED
● Lifespan: ＞50,000hours
● Driver Type: Isolation Driver
● Operating Humidity : ≤85%
Product Feature
1. It has various advantages of strong lumen direct down panel lamp.
2. Pull the switch to adjust two different color temperatures. Two different color temperature arbitrary combination. A panel lamp has two kinds of color temperature of conventional panel lamp.
3. Use environment: Hotel, factory, office, etc.
Product Dimensions
1.SL-PBE301225-M-T
2.SL-PBE606025-M-T
3.SL-PBE626225-M-T
4.SL-PBE601240-M-T
Product technical parameters
| Model |
Light effect(lm/w) |
Luminous flux(Lm) |
Power（W) |
CCT（K) |
CRI(Ra) |
Life(h） |
Dimming mode |
IP Grade |
Applicable temperature |
| SL-PBE301225-M-T |
150 |
3750 |
25 |
Pairwise combination:
3000K / 4000K / 5000K / 6500K
|
>80 |
50000 |
1. No dimming
2. Silicon controlled dimming
3. 0-10V dimming |
IP20 |
Operating temperature
and range:20-40°C≤85%RH
|
| SL-PBE606025-M-T |
3750 |
25 |
| SL-PBE626225-M-T |
3750 |
25 |
| SL-PBE601240-M-T |
6000 |
40 |
Product structure diagram
Installation method
Embedded I. The installation environment requires that the ceiling has a standard size ceiling or keel, and only the ceiling at the corresponding position needs to be removed for installation. Then replace the corresponding panel lights. No additional installation accessories are required.
Embedded II. The installation environment requires that the circlip is embedded, and a hole is made on the ceiling. The size of the hole is smaller than the size of the panel light, and then the light is absorbed on the ceiling by the elastic force of the spring.
Ceiling mounted. Installation environment requirements, the height of the storey is high, the ceiling is keel or solid wall structure, and the lamp is suspended in the room by the suspender (as shown in the above picture))
Ceiling type. The suspended ceiling is a solid wall structure. First install the ceiling frame on the solid wall. Then lock the panel light in the ceiling frame. (As shown below)
1.Determine the location of the lamp to be installed, directly screw on the screw, and fix the aluminum adapter frame on the cement roof.
2.Connect the wires internally and make sure the power is on
3.Place the lamp body in the aluminum frame
4.The whole lamp is installed, the overall appearance is elegant, the whole thickness is about 4cm
Packing diagram
1. Commercial packaging
| Model |
Carton Box(mm) |
N.W.(Kg)/PCS |
G.W/(Kg)/Carton |
PCS/Carton |
| SL-PBE301225-M-T |
L*W*H=1255*365*365 |
2.0 |
17.2 |
8 |
| SL-PBE606025-M-T |
L*W*H=655*365*665 |
1.95 |
16.9 |
8 |
| SL-PBE626225-M-T |
L*W*H=680*365*690 |
2.1 |
18 |
8 |
| SL-PBE601240-M-T |
L*W*H=1255*365*665 |
4.0 |
17.5 |
4 |
“SL” indicates Strong Luming Optoelectronics Co., Ltd
“P” indicates panel light
“A” indicates out of the way of light L=side-lit panel B=backlit panel
“E” indicates Certification Type E=CE TVU
“BCDF” indicates product dimensions 6060=595*595 3012=295*1195 6262=620*620 6012=595*1195
“GH” indicates product power 25=21W 40=40W 50=50W
“X” indicates product CCT N=3000K L=4000K C=5000K W=6000-6500K M= Two kinds of color temperature
H= Three kinds of color temperature J=3000～6500K continuously adjustable
“Y” indicates the Luminance Efficacy R=220-230lm/W S=190-200lm/W P=170-180lm/W T=150lm/W H=120lm/WN=100lm/W
Photometric Data
Case
