120LM/W LED Normal Panel Light
Performance Parameters
● Luminance Efficacy: Frosted Cover: 120LM/W
● Power Consumption: 36W / 64W
● Input Voltage：AC200~240V
● Color Temperature: 3000~6500k
● Beam Angle: 120°
● Operation Temperature: -20~40℃
● Storage Temperature :-20℃ to +60℃
● LED Type: 2835LED
● Lifespan: ＞50,000hours
● Driver Type: Isolation Driver
● Operating Humidity : ≤85%
Product Feature
1. The straight down panel lamp has high luminous efficiency. The light emitted by LED light source is directly illuminated by high transmittance lens and diffusion plate to reduce the transmission link of light source in other media and the light loss in the structure design of lamps. The light efficiency of the whole lamp is high.
2. The straight down panel lamp has light weight. The structure design is more simple, without light guide plate, reducing the weight of the whole lamp.
3. Simple structure, simpler production process, high production efficiency and good product quality,
4. High cost performance: no light guide plate, saving the cost, the light way can make a small number of lamp beads to achieve the effect of uniform light from the side light-emitting panel lamp. It has high cost performance.
5. The installation method takes into account all the installation methods of the side light panel lamp.
Product Dimensions
1.SL-PBE301236-X-H
2.SL-PBE606036-X-H
3.SL-PBE626236-X-H
4.SL-PBE601264-X-H
Product technical parameters
| Model |
Light effect(lm/w) |
Luminous flux(Lm) |
Power（W) |
CCT（K) |
CRI(Ra) |
Life(h） |
Dimming mode |
IP Grade |
Applicable temperature |
| SL-PBE301236-X-H |
120 |
4320 |
36 |
3000~6500K |
>80 |
50000 |
Dimming mode |
IP20 |
Operating temperature
and range: -20~40°C≤85%RH
|
| SL-PBE606036-X-H |
4320 |
36 |
| SL-PBE626236-X-H |
4320 |
36 |
| SL-PBE601264-X-H |
7680 |
64 |
Product structure diagram
Installation method
Embedded I. The installation environment requires that the ceiling has a standard size ceiling or keel, and only the ceiling at the corresponding position needs to be removed for installation. Then replace the corresponding panel lights. No additional installation accessories are required.
Embedded II. The installation environment requires that the circlip is embedded, and a hole is made on the ceiling. The size of the hole is smaller than the size of the panel light, and then the light is absorbed on the ceiling by the elastic force of the spring.
Ceiling mounted. Installation environment requirements, the height of the storey is high, the ceiling is keel or solid wall structure, and the lamp is suspended in the room by the suspender (as shown in the above picture)
Ceiling type. The suspended ceiling is a solid wall structure. First install the ceiling frame on the solid wall. Then lock the panel light in the ceiling frame. (As shown below)
1.Determine the location of the lamp to be installed, directly screw on the screw, and fix the aluminum adapter frame on the cement roof.
2.Connect the wires internally and make sure the power is on
3.Place the lamp body in the aluminum frame
4.The whole lamp is installed, the overall appearance is elegant, the whole thickness is about 4cm
Packing diagram
1. Commercial packaging
| Model |
Carton Box(mm) |
N.W.(Kg)/PCS |
G.W.(Kg)/Carton |
PCS/Carton |
| SL-PBE301236-X-H |
L*W*H=1255*365*365 |
2.0 |
17.2 |
8 |
| SL-PBE606036-X-H |
L*W*H=655*365*665 |
1.95 |
16.9 |
8 |
| SL-PBE626236-X-H |
L*W*H=680*365*690 |
2.1 |
18.0 |
8 |
| SL-PBE601264-X-H |
L*W*H=1255*365*665 |
4.0 |
17.5 |
4 |
“SL” indicates Strong Luming Optoelectronics Co., Ltd
“P” indicates panel light
“A” indicates out of the way of light L=side-lit panel B=backlit panel
“E” indicates Certification Type E=CE TVU
“BCDF” indicates product dimensions 6060=595*595 3012=295*1195 6262=620*620 6012=595*1195
“GH” indicates product power 36=36W 64=64W
“X” indicates product CCT N=3000K L=4000K C=5000K W=6000-6500K M= Two kinds of color temperature
H= Three kinds of color temperature J=3000～6500K continuously adjustable
“Y” indicates the Luminance Efficacy R=220-230lm/W S=190-200lm/W P=170-180lm/W T=150lm/W H=120lm/WN=100lm/W
Photometric Data
Case
